Initially we had to remove the old render from the house. This ensured we had enough room to apply new render around the quoins and...

HP12 Base Coat The house prior to base coating

The Krend Silicone FT monocouche finish was applied directly onto the blocks with mesh to add reinforcement

This is a job we had several years ago in which we were asked to match existing cornice in the house.

On this job we applied thermalime onto a wood fibre board

This is a job we did fifteen years ago. Initially the original rotten lime render was removed before the application of a hydraulic lime...

The building was prepared by using a Krend HPX to provide an even colour in the finish. We followed this up with a Silicone K1 top coat...